6.2 Set back lines for residential buildings

6.2.1 Residential building shall have set back as mentioned below unless specified otherwise in the relevant Urban Development Plan and Zoning Plans. The set back shall be measured from the outer most wall / staircase landing / window projection.

6.2.2 FRONT SET BACK
(a) The set back facing road shall not be less than 3.0 m at any point or it should follow existing building lines.
(b) In case of two or more sides facing a street the front set back shall have an average width of 3 m but not less than 1.8 m at any point.


6.2.3 SIDE AND RARE SET BACK
A minimum set back of 3 m shall be maintained.

6.2.4 Two or more habitable structures on the same plot shall have 6m between the two structures.